All pumps in the Aquascape Designs’ product line are specifically designed to support the demanding requirements for 24 hour/7days/week operating condition of a water garden. Continuous operation heightens the importance of proper pump selection to minimize power consumption yet deliver enough flow to produce the natural sights and sounds of a beautiful water feature. The 3000 specifications are: Watts:288 | Flow Rate (GPH):3,090 | Flow Rate (GPH @ 5 Ft.):3,090 | Shut-off Height (Ft.):18 There is a 2-Year Warranty on this pump!

All pumps in the Aquascape Designs’ product line are specifically designed to support the demanding requirements for 24 hour/7days/week operating condition of a water garden. Continuous operation heightens the importance of proper pump selection to minimize power consumption yet deliver enough flow to produce the natural sights and sounds of a beautiful water feature. The 4500 specifications are: Watts:630 | Flow Rate (GPH):4,740 | Flow Rate (GPH @ 5 Ft.):4,740 | Shut-off Height (Ft.):32 There is a 2-Year Warranty on this pump!

All pumps in the Aquascape Designs’ product line are specifically designed to support the demanding requirements for 24 hour/7days/week operating condition of a water garden. Continuous operation heightens the importance of proper pump selection to minimize power consumption yet deliver enough flow to produce the natural sights and sounds of a beautiful water feature. The 7500 specifications are: Watts:1050 | Flow Rate (GPH):7,500 | Flow Rate (GPH @ 5 Ft.):7,500 | Shut-off Height (Ft.):45 There is a 2-Year Warranty on this pump!

Energy efficient,2 year warranty,flow control | works great for small spitters and fountains! Specifications for 75 GPH Pump: Watts:5 | Max Lift:2'6" | Warranty: 2 Year | Manufacturer=NurseryPro | Submersible Pump:Yes | Discharge Location:Top | Discharge Size:0.5" | Cord Length:6' | Flow Rate (GPH):75 | Shut-off Height (Ft.):2 // Specifications for 210 GPH Pump: Watts:12 | Max Lift:4' | Warranty: 2 Year | Manufacturer=NurseryPro | Submersible Pump:Yes | Discharge Location:Top | Discharge Size:0.5" | Cord Length:6' | Flow Rate (GPH):210 | Shut-off Height (Ft.):4' There is a 2-Year Warranty on this pump!

Ultra Pumps represent the latest technology. Up to 40% less wattage than most mag drive pumps. Comparable heads to direct drive pumps. Tested to run continuously in pond conditions. Patented liner-safe rubber casing. Ultra low noise levels are ideal for fish health. 350 GPH Pump Specifications: Watts:35 | Flow Rate (GPH):350 | Flow Rate (GPH @ 5 Ft.):200 | Shut-off Height (Ft.):7 // 500 GPH Pump Specifications: Watts:40 | Flow Rate (GPH):500 | Flow Rate (GPH @ 5 Ft.):310 | Shut-off Height (Ft.):8 // 750 GPH Pump Specifications: Watts:45 | Flow Rate (GPH):750 | Flow Rate (GPH @ 5 Ft.):580 | Flow Rate (GPH @ 10 Ft.):180 | Shut-off Height (Ft.):11 // 1000 GPH Pump Specifications: Watts:50 | Flow Rate (GPH):1,000 | Flow Rate (GPH @ 5 Ft.):800 | Flow Rate (GPH @ 10 Ft.):480 | Shut-off Height (Ft.):14 // 1500 GPH Pump Specifications:Watts:90 | Flow Rate (GPH):1,500 | Flow Rate (GPH @ 5 Ft.):1,000 | Flow Rate (GPH @ 10 Ft.):800 | Shut-off Height (Ft.):21 There is a 3-Year Warranty on this pump!

All-in-one fountain pump kit contains everything needed in one box to create an easy to install, low maintenance fountain display. Mag-drive pump incased in a pre-filter protective case reduces mantenance cleaning. Pumps come with fountain head attachments ( 600 gph comes with Maxi Double Spray and Maxi Water Bell, the 1000 and 1500 gph comes with all-in-one Double Spray and Water Bell.
- Includes diverter valve to allow complete control of fountain performance
- Designed to be set directly in water feature
- Does not require a skimmer or other prefilter
There is a 3-Year Warranty on this pump!

- Designed to operate in larger ponds - Robust, reliable and quiet
- Low electrical operating cost
- Fish safe – uses no oil
- 20’ cord
- Includes one 1.5” threaded couple and one 90 degree elbow
- Can be used vertically or horizontally
- Recommended for use in a skimmer prefilter or MicroSnorkel Pondless Waterfall Vault
There is a 3-Year Warranty on this pump!

Accomplish what most other pumps only aspire to achieve. Its a combination of high performance flow with a low maintenance design. Drop it right in the pond and let it flow! A protective intake body surrounding our high efficiency magnetic drive pump protects the pumps from debris reducing the frequency the pump has to be removed for maintenance.
- A great pump solution to pair up with the UltraKlean pressure filters
- Flexible universal hose adaptor (accommodates 1/2” to 1 1/2” tubing) makes connecting to plumbing a breeze
- Ceramic shaft
- Graphite injection molded bearings
- 25’ power cord
There is a 3-Year Warranty on this pump!

Tsurumi’s engineers have designed our new pump line to be hydraulically “dialed” into the typical lower head water garden applications. This helps ensure that the pump is performing in its ideal operating range resulting in less vibration and wear and tear on the pump, ultimately resulting in longer pump life. The Tsurumi PL’s are reliable and built on Tsurumi’s time-tested, field proven PN series sealed motor platform. Hydraulically engineered for the lower total dynamic head ranges typically found on water feature applications, helping increase the lifespan of the pump by reducing vibration and premature component wear. For the ease of Installation, the horizontal design provides perfect fit in our filters. Same discharge height as the AquascapePRO pump series allows pumps to be interchanged without plumbing modification. Low horizontal profile helps ensure the motor is fully submerged for proper cooling. Large 1.5” intake handles bigger solids and reduces maintenances over the current Tsurumi PN and AquascapePRO pumps. These energy efficient pumps are designed for continuous duty applications and will provide years of trouble-free operation. Model 9PL: 2” female outtake, 987 Watts, 35’ Max Height, 6800 GPH

These pumps are durable and reliable! They are made to be used year round and continuous use in your water feature. The 3PN specifications are: Watts:479 | Flow Rate:(GPH)3630| Vertical Shut-off Height:(Ft.)30 There is a 2-Year Warranty on this pump!

These pumps are durable and reliable! They are made to be used year round and continuous use in your water feature. The 4PN specifications are: Watts:655 | Flow Rate:(GPH)4740| Vertical Shut-off Height:(Ft.)44 There is a 2-Year Warranty on this pump!

These pumps are durable and reliable! They are made to be used year round and continuous use in your water feature. The 8PN specifications are: Watts:924 | Flow Rate:(GPH)5520| Vertical Shut-off Height:(Ft.)56 There is a 2-Year Warranty on this pump!

NOTE: THE ITEM IS FOR PICK-UP ONLY! ORDER ONLINE, THEN CALL WHEN COMING TO PICK-UP!

Tsurumi’s engineers have designed our new pump line to be hydraulically “dialed” into the typical lower head water garden applications. This helps ensure that the pump is performing in its ideal operating range resulting in less vibration and wear and tear on the pump, ultimately resulting in longer pump life. The Tsurumi PL’s are reliable and built on Tsurumi’s time-tested, field proven PN series sealed motor platform. Hydraulically engineered for the lower total dynamic head ranges typically found on water feature applications, helping increase the lifespan of the pump by reducing vibration and premature component wear. For the ease of Installation, the horizontal design provides perfect fit in our filters. Same discharge height as the AquascapePRO pump series allows pumps to be interchanged without plumbing modification. Low horizontal profile helps ensure the motor is fully submerged for proper cooling. Large 1.5” intake handles bigger solids and reduces maintenances over the current Tsurumi PN and AquascapePRO pumps. These energy efficient pumps are designed for continuous duty applications and will provide years of trouble-free operation. Model 5PL: 2” female outtake, 660 Watts, 22’ Max Height, 5000 GPH

Tsurumi’s engineers have designed our new pump line to be hydraulically “dialed” into the typical lower head water garden applications. This helps ensure that the pump is performing in its ideal operating range resulting in less vibration and wear and tear on the pump, ultimately resulting in longer pump life. The Tsurumi PL’s are reliable and built on Tsurumi’s time-tested, field proven PN series sealed motor platform. Hydraulically engineered for the lower total dynamic head ranges typically found on water feature applications, helping increase the lifespan of the pump by reducing vibration and premature component wear. For the ease of Installation, the horizontal design provides perfect fit in our filters. Same discharge height as the AquascapePRO pump series allows pumps to be interchanged without plumbing modification. Low horizontal profile helps ensure the motor is fully submerged for proper cooling. Large 1.5” intake handles bigger solids and reduces maintenances over the current Tsurumi PN and AquascapePRO pumps. These energy efficient pumps are designed for continuous duty applications and will provide years of trouble-free operation. Model 3PL: 2” female outtake, 328 Watts, 14’ Max Height, 3000 GPH